The page you are visiting was formerly part of the Which? University website, but is now being provided by The Uni Guide — part of The Student Room. For more information please click here.

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more

Biomaterials Engineering

Entry requirements


A level

A,B,B

ABB including two from Maths, Physics, Chemistry and Biology.

Considered on a case by case basis. Please contact Loughborough University directly.

We consider applicants offering Pre-U Principal Subjects or a combination of the Pre-U and A levels, provided a minimum of three subjects overall are taken. We recognise the benefit of the Global Perspectives and Research (GPR) course in developing independent study and research skills. While we would consider this as evidence of motivation to study a specific subject in more depth, we do not generally include it as part of our offer conditions. However, it may be used to further consider an application upon receipt of final examination results.

We recognise the benefit of the Extended Project in developing independent research and critical thinking skills. We would consider this as evidence of motivation to study a specific subject in more depth, and while we do not generally include it as part of our offer conditions, it may be used to further consider an application upon receipt of final examination results. www.lboro.ac.uk/study/undergraduate/apply/entry-requirements/

GCSE/National 4/National 5

GCSE Maths Grade 4/C

International Baccalaureate Diploma Programme

34

34 (6,5,5 HL) including any two of Maths, Biology, Chemistry or Physics at HL

We accept a wide range of international qualifications for entry as outlined on our website – please view the individual course typical offers on our website and choose Ireland in the Country/region drop down field for more information.

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016)

DDM

BTEC Level 3 National Extended Diploma in a relevant subject: DDM with Distinctions in all Maths Units Preferred subjects: Aeronautical, Engineering, Mechanical or Manufacturing

Scottish Advanced Higher

A,B

AB in Maths, Physics, Biology or Chemistry, plus highers at majority A and B grades

Applicants taking the Welsh Baccalaureate Advanced Diploma will be asked to achieve the A level requirements for their course as part of their qualification. The Skills Challenge Certificate will be accepted alongside two A levels providing individual course entry and subject requirements are met. www.lboro.ac.uk/study/undergraduate/apply/entry-requirements/

UCAS Tariff

104-128

We've calculated how many Ucas points you'll need for this course.

About this course


Course option

3.0years

Full-time | 2021

Subject

Materials engineering

Biomaterials Engineering is an exciting course delivered within the Department of Materials at Loughborough, and builds on our strengths in materials and bio-related disciplines across the university.

The course will teach you the fundamentals of materials, their properties and engineering methods, and how to apply these to the biomedical field, particularly within the human body. Application areas are in the health, sport, and lifestyle sectors, as well as in regenerative medicine. In the context of a world-wide ageing population, biomaterials and medical device technology are developing fields that are set to grow for many years.

By its nature, this course is interdisciplinary, and benefits from the expertise of our School of Sports, Exercise and Health Sciences and Chemical Engineering department (Regenerative Medicine).

Our Biomaterials Engineering degree is a comprehensive programme of modules that deliver both the theory and the essential industrial relevance employers seek from graduates. The course content encompasses all aspects of materials and biomaterials; their selection, manufacture, testing, assembly and environmental impact both during production and at the end of life.

**What's the difference between MEng and BEng?**
The first two years of a BEng and MEng share the same content, format and structure, with a good mix of theory, application and practical content from day one. The MEng differs from the BEng course in the third and fourth years by offering the opportunity to study technical and management topics at a more advanced level. It is possible to transfer from a BEng to an MEng from the start of the course up to the end of the second year, providing that the transfer progression criteria are met.

Modules

For a full list of areas studied, see the 'What You'll Study' section of the course page on our website.

Assessment methods

You are assessed by a mixture of coursework and written examinations.

This will vary from module to module, but overall the approximate ratio is 60/40 Exams/Coursework. Modules containing design-orientated work, individual and group projects are also assessed by oral presentation and in some cases poster presentation.

Tuition fees

Select where you currently live to see what you'll pay:

England
£9,250
per year
International
£24,650
per year
Northern Ireland
£9,250
per year
Scotland
£9,250
per year
Wales
£9,250
per year

The Uni


Course location:

Loughborough University

Department:

Materials

Read full university profile

What students say


We've crunched the numbers to see if overall student satisfaction here is high, medium or low compared to students studying this subject(s) at other universities.

96%
high
Materials engineering

How do students rate their degree experience?

The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.

Materials technology

Teaching and learning

87%
Staff make the subject interesting
96%
Staff are good at explaining things
93%
Ideas and concepts are explored in-depth
83%
Opportunities to apply what I've learned

Assessment and feedback

Feedback on work has been timely
Feedback on work has been helpful
Staff are contactable when needed
Good advice available when making study choices

Resources and organisation

98%
Library resources
96%
IT resources
98%
Course specific equipment and facilities
78%
Course is well organised and has run smoothly

Student voice

Staff value students' opinions
Feel part of a community on my course

Who studies this subject and how do they get on?

85%
UK students
15%
International students
74%
Male students
26%
Female students
84%
2:1 or above
3%
First year drop out rate

Most popular A-Levels studied (and grade achieved)

B
B
B

After graduation


The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.

Materials technology

What are graduates doing after six months?

This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.

£27,000
med
Average annual salary
97%
med
Employed or in further education
91%
high
Employed in a role where degree was essential or beneficial

Top job areas of graduates

57%
Engineering professionals
4%
Business, research and administrative professionals
4%
Architects, town planners and surveyors

What about your long term prospects?

Looking further ahead, below is a rough guide for what graduates went on to earn.

Materials and technology

The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.

£27k

£27k

£32k

£32k

£36k

£36k

Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.

Explore these similar courses...

Higher entry requirements
Imperial College London
Materials Science and Engineering
Bachelor of Engineering (with Honours) - BEng (Hon)
3.0 years | Full-time | 2021
Lower entry requirements
Loughborough University
Materials Engineering with an International Foundation Year
Bachelor of Engineering (with Honours) - BEng (Hon)
4.0 years | Full-time | 2021
Nearby University
University of Birmingham
Materials Science & Engineering
Bachelor of Engineering (with Honours) - BEng (Hon)
3.0 years | Full-time | 2021
Same University
Loughborough University
Materials Science and Engineering
Bachelor of Engineering (with Honours) - BEng (Hon)
3.0 years | Full-time | 2021

Share this page

This is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.

Have a question about this info? Learn more here

This is the percentage of applicants to this course who received an offer last year, through Ucas.

Have a question about this info? Learn more here

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Course location and department:

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Teaching Excellence Framework (TEF):

We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.

Have a question about this info? Learn more here

This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).

This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.

Have a question about this info? Learn more here

This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.

You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.

Have a question about this info? Learn more here

Post-six month graduation stats:

This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.

It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.

Have a question about this info? Learn more here

Graduate field commentary:

The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show

Have a question about this info? Learn more here

The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.

While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?

Have a question about this info? Learn more here