Get degree ideas using our A level explorer tool

Engineering Management

Entry requirements


A level

A,B,B

ABB including either Maths or Physics

Not accepted - Foundation entry only

Considered on a case by case basis. Please contact Loughborough University directly.

We recognise the benefit of the Extended Project in developing independent research and critical thinking skills. We would consider this as evidence of motivation to study a specific subject in more depth, and while we do not generally include it as part of our offer conditions, it may be used to further consider an application upon receipt of final examination results. www.lboro.ac.uk/study/undergraduate/apply/entry-requirements/

GCSE/National 4/National 5

GCSE English Language grade 4/C

International Baccalaureate Diploma Programme

34

34 (6,5,5 HL) including Maths or Physics at HL

We accept a wide range of international qualifications for entry as outlined on our website – please view the individual course typical offers on our website and choose Ireland in the Country/region drop down field for more information.

Pearson BTEC Level 3 National Diploma (first teaching from September 2016)

DD

Grade Distinction Distinction in BTEC Level 3 National Diploma in Engineering plus Grades BB from two A levels including Mathematics or Physics Preferred BTEC subjects include All Engineering

Pearson BTEC Level 3 National Extended Certificate (first teaching from September 2016)

D

Grade Distinction in BTEC Level 3 National Extended Certificate in Engineering plus Grades AB from two A levels including Mathematics or Physics Preferred BTEC subjects include All Engineering

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016)

D*DD

BTEC Level 3 National Extended Diploma: D*DD in a relevant subject plus A Level Maths at grade B Preferred BTEC subjects include All Engineering

Scottish Advanced Higher

A,B

AB including either Maths or Physics, plus Highers at AAB in three other subjects

For 2024 entry, T Levels are currently being considered on a case by case basis. More information can be found on our website at https://www.lboro.ac.uk/study/undergraduate/apply/entry-requirements/

Applicants taking the Welsh Baccalaureate Advanced Diploma will be asked to achieve the A level requirements for their course as part of their qualification. The Skills Challenge Certificate will be accepted alongside two A levels as long as individual course entry and subject requirements are met. www.lboro.ac.uk/study/undergraduate/apply/entry-requirements/

UCAS Tariff

104-128

We've calculated how many Ucas points you'll need for this course.

You may also need to…

Attend an interview

About this course


Course option

3years

Full-time | 2024

Subjects

Mechanical engineering

Production and manufacturing engineering

One of only a few Engineering Management courses in the UK, our Engineering Management degree is accredited by the Institution of Mechanical Engineers (IMechE) and the Institution of Engineering and Technology (IET). It is concerned with the management of engineering within a business context and considers the problem solving of engineering, blended with planning, management and organisational elements of companies, taking projects from idea to delivery.

Engineering companies involve complex chains of materials and supplies procurement, tiered suppliers, production processes and customer delivery, alongside the technical expertise of the different engineering disciplines. Business models and frameworks apply equally to engineering disciplines as well as other commercial sectors, with the management of legal and contractual requirements, and human resource commitments.

Our Engineering Management course provides graduates with an understanding of basic engineering sciences and manufacturing processes. This allows the development of a solid foundation in engineering and technology vocabulary and understanding.

This material is partnered with a broad range of business strategy, business organisation, human management, resource management and project planning modules, which provide graduates with the skills to manage, across a range of engineering and technology disciplines. The priority is to interface and integrate these key activities with the business organisation and financial management of companies large and small, national and global.

Modules

For a full list of areas studied, see the 'What You'll Study' section of the course page on our website.

Assessment methods

Lecture based modules are assessed by a combination of coursework and formal examinations taken at the end of each semester.

Project module assessments require written reports and technical presentations, preparing you for your subsequent career.

The proportion of coursework assessment is approximately 30% to 50% depending on degree course, semester/year and optional modules.

Tuition fees

Select where you currently live to see what you'll pay:

England
£9,250
per year
EU
£27,250
per year
International
£27,250
per year
Northern Ireland
£9,250
per year
Scotland
£9,250
per year
Wales
£9,250
per year

Extra funding

All of our courses have an established reputation with employers in industry. Companies, therefore, target the School with placement year opportunities and a number of companies offer sponsorship, for which there is intense competition. Students seeking sponsorship are urged to consult publications such as Career Research and Development (CRAC) and Engineering Opportunities.

Students studying many of our Engineering degree courses, and are intending to take up a career in the Armed Forces or Civil Service, may be eligible for financial support under the Defence STEM Undergraduate Scheme.

The Uni


Course location:

Loughborough University

Department:

Wolfson School of Mechanical, Electrical and Manufacturing Engineering

Read full university profile

What students say


We've crunched the numbers to see if overall student satisfaction here is high, medium or low compared to students studying this subject(s) at other universities.

82%
Mechanical engineering
80%
Production and manufacturing engineering

How do students rate their degree experience?

The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.

Mechanical engineering

Teaching and learning

73%
Staff make the subject interesting
86%
Staff are good at explaining things
79%
Ideas and concepts are explored in-depth
82%
Opportunities to apply what I've learned

Assessment and feedback

Feedback on work has been timely
Feedback on work has been helpful
Staff are contactable when needed
Good advice available when making study choices

Resources and organisation

91%
Library resources
93%
IT resources
88%
Course specific equipment and facilities
75%
Course is well organised and has run smoothly

Student voice

Staff value students' opinions
Feel part of a community on my course

Who studies this subject and how do they get on?

86%
UK students
14%
International students
89%
Male students
11%
Female students
80%
2:1 or above
8%
First year drop out rate

Most popular A-Levels studied (and grade achieved)

A
A
A

Production and manufacturing engineering

Teaching and learning

70%
Staff make the subject interesting
84%
Staff are good at explaining things
84%
Ideas and concepts are explored in-depth
81%
Opportunities to apply what I've learned

Assessment and feedback

Feedback on work has been timely
Feedback on work has been helpful
Staff are contactable when needed
Good advice available when making study choices

Resources and organisation

89%
Library resources
81%
IT resources
97%
Course specific equipment and facilities
66%
Course is well organised and has run smoothly

Student voice

Staff value students' opinions
Feel part of a community on my course

Who studies this subject and how do they get on?

85%
UK students
15%
International students
72%
Male students
28%
Female students
90%
2:1 or above
5%
First year drop out rate

Most popular A-Levels studied (and grade achieved)

A
B
A

After graduation


The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.

Mechanical engineering

What are graduates doing after six months?

This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.

£27,000
med
Average annual salary
96%
med
Employed or in further education
84%
med
Employed in a role where degree was essential or beneficial

Top job areas of graduates

58%
Engineering professionals
6%
Business, research and administrative professionals
4%
Science, engineering and production technicians

We're short of engineers in a lot of areas and mechanical engineering is no exception. Mechanical engineers are in demand across multiple industries, with vehicle manufacturing most popular, with roles especially common in design and manufacturing. Other important sectors include aerospace, the oil and gas industry, consultancy and defence. Jobs are all around the country, with London, the Midlands, Scotland and the South East the most likely places for a new mechanical engineer to find work at the moment, and starting salaries are good. Although large employers are much the most likely place to get work, some of the most challenging, cutting edge jobs are with small niche engineering firms, so keep your eyes peeled if you want something a little different. Bear in mind that a lot of courses are four years long, and lead to an MEng qualification — this is necessary if you want to become a Chartered Engineer.

Production and manufacturing engineering

What are graduates doing after six months?

This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.

£26,500
med
Average annual salary
98%
med
Employed or in further education
83%
med
Employed in a role where degree was essential or beneficial

Top job areas of graduates

33%
Engineering professionals
21%
Design occupations
6%
Architects, town planners and surveyors

Graduates are in significant demand, so unemployment rates are well below the national graduate average and starting salaries are well above average. Much the most common industries for these graduates are now vehicle manufacture - there are not enough people with these degrees to go round and so the big employers tend to take the lion's share at the moment. But pretty much anywhere there is manufacturing, there are production engineers. Bear in mind that a lot of courses are four years long, and lead to an MEng qualification — this is necessary if you want to become a Chartered Engineer.

What about your long term prospects?

Looking further ahead, below is a rough guide for what graduates went on to earn.

Mechanical engineering

The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.

£27k

£27k

£34k

£34k

£39k

£39k

Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.

Production and manufacturing engineering

The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.

£27k

£27k

£34k

£34k

£39k

£39k

Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.

Explore these similar courses...

Share this page

This is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.

Have a question about this info? Learn more here

This is the percentage of applicants to this course who received an offer last year, through Ucas.

Have a question about this info? Learn more here

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Course location and department:

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Teaching Excellence Framework (TEF):

We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.

Have a question about this info? Learn more here

This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).

This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.

Have a question about this info? Learn more here

This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.

You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.

Have a question about this info? Learn more here

Post-six month graduation stats:

This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.

It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.

Have a question about this info? Learn more here

Graduate field commentary:

The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show

Have a question about this info? Learn more here

The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.

While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?

Have a question about this info? Learn more here