Get degree ideas using our A level explorer tool

Robotics

Entry requirements


128 UCAS points including Grade B in A Level Maths and Grade B in a second relevant subject: Chemistry / Computing / Design Technology / Electronics / Engineering / Physics / Further Maths / Pure Maths / Use of Maths / Statistics. Excluding General Studies.

Considered in combination alongside A Level Mathematics and second relevant subject.

Considered in combination.

Considered on an individual basis.

Considered in combination alongside A Level Mathematics and second relevant subject.

Considered in combination.

International Baccalaureate Diploma Programme

32

32 points overall to include 5 at Higher Level in Maths and 5 at Higher Level in a second relevant subject. English and Maths accepted within as GCSE equivalent.

Leaving Certificate - Higher Level (Ireland) (first awarded in 2017)

H1,H2,H2,H2,H3

To include Maths and a second relevant subject.

Considered in combination alongside A Level Mathematics and second relevant subject.

Considered in combination alongside A Level Mathematics and second relevant subject.

Considered in combination.

Considered in combination.

Considered in combination.

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016)

DDM

BTEC must be Engineering / Science / Technology based. Will require Distinction in Mathematics units.

Considered in combination.

Considered in combination alongside A Level Mathematics and second relevant subject.

128 UCAS points including Grade B in Advanced Higher Maths and Grade B in a second relevant subject.

Considered in combination with Advanced Highers.

UCAS Tariff

128

128 UCAS points including Grade B in A Level Maths and Grade B in a second relevant subject: Chemistry / Computing / Design Technology / Electronics / Engineering / Physics / Further Maths / Pure Maths / Use of Maths / Statistics. Excluding General Studies.

Considered in combination.

About this course


This course has alternative study modes. Contact the university to find out how the information below might vary.

Course option

4years

Full-time | 2024

Other options

5 years | Sandwich | 2024

Subjects

Mechatronics and robotics

Cybernetics

The MEng Robotics course leads to a high-level qualification which is recognised by The Institution of Engineering and Technology (IET), providing a fast route to Chartered Engineer status. The course introduces fundamental concepts in the area of robotics, as well as specialist topics, preparing students for future careers in industry. It digs deep into the robotic technologies that are shaping the future and adopts a hands-on approach which students develop in our specialist laboratories.

The field of robotics is very dynamic and constantly changing. However our lectures are given by research active staff, ensuring teaching always remains up-to-date and relevant to the needs of industry. This leads to very high student employment after graduation.

**Key features:**

* Four year integrated masters programme.

* Our robotics courses have a large number of laboratory practical sessions embedded in their modules, and this is a strong feature of the robotics teaching in Plymouth. This ensures that you can consolidate theory learned in lectures using real practical tasks, making your understanding of topics much more concrete.

* Students in engineering, science and the arts have access to a range of specialist equipment and innovative laboratories in our new engineering and design facility.

* Accredited by the Institution of Engineering and Technology on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as a Chartered Engineer.

* Undertake a major robotics design and implementation in your final project, showcasing your technical and managerial skills.

* Capitalise on the opportunity to take a work placement in your second or third year, putting your robotics skills into action in the real world.

* Students are able to get involved with industrial partners for their project work.

* Students can undertake industrial placements and summer internships with researchers at the University.

* Draw on unique opportunities to engage in world-class robotics research, and in a variety of activities.

Modules

In your first year you'll learn through doing, developing your knowledge and practical problem-solving skills in our dedicated robotics and electronics laboratories. From engineering mathematics to analogue and digital electronics, you’ll build up the essential foundations for understanding robotic systems. Group project work will help you develop your communication skills and you'll learn structured design procedures for hardware and software all brought together in an integrating robotics project.

Throughout your second year, you will develop a greater understanding of underlying theoretical and practical principles of robotic systems. You will make use of standard software tools for design and simulation and control of robots which are essential preparation for a placement or your final year individual project.

An optional work placement experience gives you the opportunity to put theory into practice, grow your understanding of robotics in the real world and showcase your growing expertise. We can help you find industrial placement opportunities in the UK and abroad. Placements will complement your studies with real-world industrial experience which can lead to final year sponsorship. Many of our graduates are offered permanent jobs with their placement company.

In the fourth year, you will learn additional more advanced concepts and topics in the field of robotics. You will also have the opportunity to make use of the knowledge you have consolidated this far and apply it to your individual project, which also provides a means to develop and practice your presentation and communication skills which are also vital for your future robotics career.

The final year of the MEng programme introduces more specialist topic in robotics and a major robotics project.

The modules shown for this course or programme are those being studied by current students, or expected new modules. Modules are subject to change depending on year of entry and up to date information can be found on our website.

Assessment methods

For up to date details, please refer to our website or contact the institution directly.

The Uni


Course location:

University of Plymouth

Department:

School of Engineering, Computing and Mathematics

Read full university profile

What students say


We've crunched the numbers to see if overall student satisfaction here is high, medium or low compared to students studying this subject(s) at other universities.

62%
Mechatronics and robotics
79%
Cybernetics

How do students rate their degree experience?

The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.

Production and manufacturing engineering

Teaching and learning

67%
Staff make the subject interesting
79%
Staff are good at explaining things
75%
Ideas and concepts are explored in-depth
79%
Opportunities to apply what I've learned

Assessment and feedback

Feedback on work has been timely
Feedback on work has been helpful
Staff are contactable when needed
Good advice available when making study choices

Resources and organisation

79%
Library resources
73%
IT resources
79%
Course specific equipment and facilities
33%
Course is well organised and has run smoothly

Student voice

Staff value students' opinions
Feel part of a community on my course

Who studies this subject and how do they get on?

87%
UK students
13%
International students
82%
Male students
18%
Female students
84%
2:1 or above
18%
First year drop out rate

Most popular A-Levels studied (and grade achieved)

B
C
D

Electrical and electronic engineering

Teaching and learning

71%
Staff make the subject interesting
79%
Staff are good at explaining things
71%
Ideas and concepts are explored in-depth
100%
Opportunities to apply what I've learned

Assessment and feedback

Feedback on work has been timely
Feedback on work has been helpful
Staff are contactable when needed
Good advice available when making study choices

Resources and organisation

71%
Library resources
77%
IT resources
93%
Course specific equipment and facilities
64%
Course is well organised and has run smoothly

Student voice

Staff value students' opinions
Feel part of a community on my course

Who studies this subject and how do they get on?

84%
UK students
16%
International students
84%
Male students
16%
Female students
82%
2:1 or above
23%
First year drop out rate

Most popular A-Levels studied (and grade achieved)

B
C
D

After graduation


The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.

Production and manufacturing engineering

What are graduates doing after six months?

This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.

£22,000
med
Average annual salary
98%
high
Employed or in further education
85%
high
Employed in a role where degree was essential or beneficial

Top job areas of graduates

46%
Engineering professionals
14%
Science, engineering and production technicians
6%
Business, research and administrative professionals

Graduates are in significant demand, so unemployment rates are well below the national graduate average and starting salaries are well above average. Much the most common industries for these graduates are now vehicle manufacture - there are not enough people with these degrees to go round and so the big employers tend to take the lion's share at the moment. But pretty much anywhere there is manufacturing, there are production engineers. Bear in mind that a lot of courses are four years long, and lead to an MEng qualification — this is necessary if you want to become a Chartered Engineer.

Electrical and electronic engineering

What are graduates doing after six months?

This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.

£26,000
med
Average annual salary
91%
med
Employed or in further education
88%
med
Employed in a role where degree was essential or beneficial

Top job areas of graduates

61%
Engineering professionals
11%
Information technology and telecommunications professionals
7%
Business, research and administrative professionals

This is one of the more popular areas to study engineering and there is not quite such a serious shortage of electrical engineers as there is of other engineering subjects - but there's still plenty of demand. The most common jobs are in telecommunications, electrical and electronic engineering, but there is some crossover with the computing industry, so many graduates start work in IT and computing jobs. At the moment, there's a particular demand for electrical engineers in the electronics, and the car and aerospace industries, and also in defence, and salaries can vary across the country depending on the industry you start in. Bear in mind that a lot of courses are four years long, and lead to an MEng qualification — this is necessary if you want to become a Chartered Engineer.

What about your long term prospects?

Looking further ahead, below is a rough guide for what graduates went on to earn.

Production and manufacturing engineering

The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.

£25k

£25k

£30k

£30k

£37k

£37k

Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.

Electrical and electronic engineering

The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.

£25k

£25k

£30k

£30k

£37k

£37k

Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.

Explore these similar courses...

Higher entry requirements
City, University of London | Islington
Engineering Systems
MEng (Hon) 4 Years Full-time 2024
UCAS Points: 128
Lower entry requirements
Edge Hill University | Ormskirk
Intelligent Automation & Robotics
MEng (Hon) 4 Years Full-time 2024
UCAS Points: 112-128

Share this page

This is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.

Have a question about this info? Learn more here

This is the percentage of applicants to this course who received an offer last year, through Ucas.

Have a question about this info? Learn more here

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Course location and department:

This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.

Have a question about this info? Learn more here

Teaching Excellence Framework (TEF):

We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.

Have a question about this info? Learn more here

This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).

This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.

Have a question about this info? Learn more here

This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.

You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.

Have a question about this info? Learn more here

Post-six month graduation stats:

This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.

It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.

Have a question about this info? Learn more here

Graduate field commentary:

The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show

Have a question about this info? Learn more here

The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.

While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?

Have a question about this info? Learn more here