Design, Innovation and Creative Engineering
Queen Mary University of London
UCAS Code: 4A33 | Bachelor of Engineering (with Honours) - BEng (Hon)
Queen Mary University of London
UCAS Code: 4A33 | Bachelor of Engineering (with Honours) - BEng (Hon)
Entry requirements
A level
Including Maths or Physics. If you do not have an additional in a creative subject you should be able to demonstrate creativity by another method, for example as a GCSE or an activity outside school. Excluded subjects - General Studies and Critical Thinking Please note: You will also be excepted to achieve a Pass grade in the practical endorsement for any of the following A levels - Biology, Chemistry, Physics - if taken with one of the Awarding Bodies in England.
Access to HE Diploma
We consider applications from students with the Access to Higher Education Diploma in a Physics and Mathematics based discipline. Entry will normally be to the BEng or BSc. The minimum academic requirement is to achieve 60 credits overall, with 45 credits at Level 3, of which 33 credits must be at Distinction and 12 credits at Merit or higher. Applications are considered on a case by case basis.
We consider applications from students offering an EPQ and may make an alternative offer to include three A levels, one grade lower than our usual requirement, along with a specific grade in the EPQ.
GCSE/National 4/National 5
A minimum of five GCSE passes to include English at grade C or 4 or an acceptable equivalent will be required.
International Baccalaureate Diploma Programme
6,6,5 at HL including Mathematics or Physics. If students do not have an IB creative subject at standard or higher level they should be able to demonstrate creativity in their personal statement by another method, for example through an activity outside school.
Queen Mary University of London welcomes applications from students currently studying Level 3 BTEC qualifications and will consider you for entry to the majority of our undergraduate courses. The typical entry requirements will vary according to the course you are applying for. Some of our courses require specific subject knowledge which you may not be able to cover as part of a Level 3 BTEC qualification and we may therefore require additional Level 3 qualifications to ensure that you are suitably prepared for relevant courses. A small number of our courses do not accept BTEC qualifications for entry, either as a standalone qualification, or in combination with other qualifications at Level 3. Information on our typical entry requirements and guidance for applying can be found at http://www.qmul.ac.uk/undergraduate/entry/btec/ If you are at all unsure about the acceptability of your BTEC qualification for entry, please contact the Admissions team for individual advice ([email protected]).
UCAS Tariff
We've calculated how many Ucas points you'll need for this course.
About this course
Future design graduates will need to be both artists and engineers, combining the latest technology with a creative process.
Good engineering alone can’t solve the complex challenges of the 21st century. Neither can design if the ideas go beyond the capabilities of today’s technology. And that’s where this course comes in.
Our practical programme allows you to develop strong creative design capabilities alongside engineering expertise. You won’t just apply your knowledge to solve problems. You’ll become a creative designer who can step back and question why a problem exists and discover users that have been overlooked.
From pitches to portfolios
In tutorial-style sessions, we’ll encourage you to think and develop as an independent designer, with pitches, presentations and portfolios to put your skills to the test. You’ll explore material properties of artefacts as well as looking at their environmental impact and manufacturing. All with support from academics and technical staff, as well as visiting design consultants.
In your final year, you’ll identify and explore a design problem that interests you. Past students have designed kit for the London Air Ambulance, tools to help patients communicate pain more effectively and solutions to avoid single-use containers in the cosmetic industry.
Some students progress to postgraduate study in areas like robotics. Some find their first design role. Others work in strategy or marketing. Whatever you do next, you could be the person who solves problems faced by communities around the globe.
Modules
Year 1
You'll study a range of core principles including:
EMS402U - Engineering Design
EMS403U - Studio Practice Year 1 (30 credits)
EMS412U - Computational and Mathematical Modelling 1
EMS418U - Computational and Mathematical Modelling 2
EMS450U - Exploring Engineering
EMS406U - Data and Design
EMS430U – Materials Engineering
EMS499U - Skills for Engineers
You can look up module descriptions using our module directory.
Please note that all modules are subject to change.
Assessment methods
Assessment typically includes a combination of coursework, written reports, projects, presentations, group work and exams in the summer.
Tuition fees
Select where you currently live to see what you'll pay:
The Uni
Queen Mary University of London
Engineering and Materials Science
What students say
We've crunched the numbers to see if the overall teaching satisfaction score here is high, medium or low compared to students studying this subject(s) at other universities.
How do students rate their degree experience?
The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.
Engineering (non-specific)
Teaching and learning
Assessment and feedback
Resources and organisation
Student voice
Who studies this subject and how do they get on?
Most popular A-Levels studied (and grade achieved)
Design studies
Sorry, no information to show
This is usually because there were too few respondents in the data we receive to be able to provide results about the subject at this university.
Who studies this subject and how do they get on?
Most popular A-Levels studied (and grade achieved)
After graduation
The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.
Engineering (non-specific)
What are graduates doing after six months?
This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.
Top job areas of graduates
As a mixed subject within engineering where students get a chance to learn from a range of disciplines, this course isn't taken by as many people as some of the more specialist disciplines. Demand for engineering skills is high, though, and so unemployment rates are low and the average starting salary was a very healthy £26,400 for 2015 graduates. Graduates are able to specialise enough to be working in jobs in engineering — especially in design and development - as well as engineering project management. IT and management consultancy were some of the more common jobs outside engineering. Bear in mind that a lot of courses are four years long, and lead to a MEng qualification — this is necessary if you want to become a Chartered Engineer.
Design studies
What are graduates doing after six months?
This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.
Top job areas of graduates
What about your long term prospects?
Looking further ahead, below is a rough guide for what graduates went on to earn.
Engineering (non-specific)
The graph shows median earnings of graduates who achieved a degree in this subject area one, three and five years after graduating from here.
£27k
£35k
£41k
Note: this data only looks at employees (and not those who are self-employed or also studying) and covers a broad sample of graduates and the various paths they've taken, which might not always be a direct result of their degree.
Sorry, no information to show
This is usually because there were too few respondents in the data we receive to be able to provide results about the subject at this university.
Explore these similar courses...
Lower entry requirements
Nearby University
Higher entry requirementsSame UniversityThis is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.
Have a question about this info? Learn more here
This is the percentage of applicants to this course who received an offer last year, through Ucas.
Have a question about this info? Learn more here
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Course location and department:
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Teaching Excellence Framework (TEF):
We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.
Have a question about this info? Learn more here
This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).
This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.
Have a question about this info? Learn more here
This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.
You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.
Have a question about this info? Learn more here
Post-six month graduation stats:
This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.
It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.
Have a question about this info? Learn more here
Graduate field commentary:
The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show
Have a question about this info? Learn more here
The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.
While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?
Have a question about this info? Learn more here
