University of Leeds
UCAS Code: J510 | Bachelor of Engineering (with Honours) - BEng (Hon)
Entry requirements
A level
AAB, including Mathematics and either Physics or Chemistry. Where an A-Level Science subject is taken, we require a pass in the practical science element, alongside the achievement of the A-Level at the stated grade. Excludes A-Level General Studies or Critical Thinking. Extended Project Qualification (EPQ) and International Project Qualification (IPQ): We recognise the value of these qualifications and the effort and enthusiasm that applicants put into them, and where an applicant offers an A in the EPQ or IPQ we may make an offer of ABB at A-Level with an A in Mathematics and a B or higher in either Physics or Chemistry.
Access to HE Diploma
Pass 60 credits overall with 45 credits at Level 3. 30 credits needed at Distinction including an appropriate amount of Mathematics and either Physics or Chemistry and the remaining 15 credits at Merit or above.
Cambridge International Pre-U Certificate - Principal
D3, D3, M2 including Mathematics and either Physics or Chemistry.
GCSE/National 4/National 5
English Language at grade C (4) or above, or an appropriate English language qualification.
16 points at higher level to include 6 points in Mathematics: Applications and Interpretation or 5 points in Mathematics: Analysis and Approaches and either Physics or Chemistry.
Leaving Certificate - Higher Level (Ireland) (first awarded in 2017)
H2 H2 H2 H2 H2 H2 including Mathematics and either Physics or Chemistry.
Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016)
DDD (RQF) with Distinctions in relevant Mathematics and Chemistry or Physics units. Some Mathematics and Chemistry or Physics units may be optional on your BTEC but are required by the Faculty. We can only consider the BTEC Extended Diploma in Applied Science if the applicant is also studying A-level Mathematics. Please contact us for further information.
Scottish Higher
AB at Advanced level, including Mathematics and either Physics or Chemistry, and AABBB at Higher level.
UCAS Tariff
We've calculated how many Ucas points you'll need for this course.
About this course
This course has alternative study modes. Contact the university to find out how the information below might vary.
From aerospace, communications and medicine, right through to everyday consumer goods like TVs, technical fabrics for high-performance clothing and sports equipment, the discovery and development of new materials have significantly impacted the world. Materials science is also at the forefront of global challenges like the move towards net zero, with new materials for energy generation and storage enabling reduced carbon emissions. This is why material scientists are highly sought after across a wide range of industries — and why it’s such a relevant discipline to learn.
Studying materials science and engineering at Leeds will equip you with a thorough grounding in the concepts that underpin materials science from an engineering, physics and chemistry perspective, alongside learning a range of transferable skills to equip you for a career in this fast-moving field.
As it’s a multidisciplinary course, you’ll benefit from the excellent facilities, research and teachings from three separate schools: the School of Chemical and Process Engineering, the School of Physics and the School of Chemistry.
You’ll be taught by expert academics, many of whom are members of the Bragg Centre for Materials Research and affiliated to the Sir Henry Royce Institute for Advanced Materials, giving you the chance to interact and develop professional relationships with researchers at the forefront of the industry.
You’ll also have access to specialist facilities right here on campus, alongside exciting opportunities like studying abroad and industrial work placements to ensure you have the best grounding to head out into your professional career.
**Why study at Leeds:**
- Our globally-renowned research that has been responsible for engineering new technologies and led industry-driven developments also feeds into your course, shaping what you learn with the latest thinking.
- Experience expert teaching, delivered by a programme team who specialise in a wide range of materials science and engineering disciplines and have extensive industry experience.
- Start building your future career path from day one, establishing relations in the field with industry professionals through our strong partnerships with organisations such as Rolls-Royce, Samsung, Johnson Matthey, IBM, Dow Corning and AstraZeneca.
- Access our specialist facilities across three Schools, including state-of-the-art equipment and instrumentation, along with labs fully equipped with the latest technology to support your learning.
- Broaden your experience before you graduate and enhance your career prospects with our study abroad programmes and paid industrial work placement opportunities.
- During this course, there is the possibility of transferring to the four-year integrated Masters (MEng, BEng) degree.
- We have over 300 clubs and societies you can join at Leeds — including academic societies across many disciplines. There you can meet more of your coursemates and lecturers, whilst gaining guidance and invaluable insight from industry professionals at regular talks and networking events throughout your degree.
The Uni
University of Leeds
School of Chemical and Process Engineering
What students say
How do students rate their degree experience?
The stats below relate to the general subject area/s at this university, not this specific course. We show this where there isn’t enough data about the course, or where this is the most detailed info available to us.
Materials technology
Sorry, no information to show
This is usually because there were too few respondents in the data we receive to be able to provide results about the subject at this university.
Who studies this subject and how do they get on?
Most popular A-Levels studied (and grade achieved)
Materials science
Sorry, no information to show
This is usually because there were too few respondents in the data we receive to be able to provide results about the subject at this university.
After graduation
The stats in this section relate to the general subject area/s at this university – not this specific course. We show this where there isn't enough data about the course, or where this is the most detailed info available to us.
Materials technology
What are graduates doing after six months?
This is what graduates told us they were doing (and earning), shortly after completing their course. We've crunched the numbers to show you if these immediate prospects are high, medium or low, compared to those studying this subject/s at other universities.
Top job areas of graduates
Sorry, no information to show
This is usually because there were too few respondents in the data we receive to be able to provide results about the subject at this university.
Explore these similar courses...
This is what the university has told Ucas about the criteria they expect applicants to satisfy; some may be compulsory, others may be preferable.
Have a question about this info? Learn more here
This is the percentage of applicants to this course who received an offer last year, through Ucas.
Have a question about this info? Learn more here
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Course location and department:
This is what the university has told Ucas about the course. Use it to get a quick idea about what makes it unique compared to similar courses, elsewhere.
Have a question about this info? Learn more here
Teaching Excellence Framework (TEF):
We've received this information from the Department for Education, via Ucas. This is how the university as a whole has been rated for its quality of teaching: gold silver or bronze. Note, not all universities have taken part in the TEF.
Have a question about this info? Learn more here
This information comes from the National Student Survey, an annual student survey of final-year students. You can use this to see how satisfied students studying this subject area at this university, are (not the individual course).
This is the percentage of final-year students at this university who were "definitely" or "mostly" satisfied with their course. We've analysed this figure against other universities so you can see whether this is high, medium or low.
Have a question about this info? Learn more here
This information is from the Higher Education Statistics Agency (HESA), for undergraduate students only.
You can use this to get an idea of who you might share a lecture with and how they progressed in this subject, here. It's also worth comparing typical A-level subjects and grades students achieved with the current course entry requirements; similarities or differences here could indicate how flexible (or not) a university might be.
Have a question about this info? Learn more here
Post-six month graduation stats:
This is from the Destinations of Leavers from Higher Education Survey, based on responses from graduates who studied the same subject area here.
It offers a snapshot of what grads went on to do six months later, what they were earning on average, and whether they felt their degree helped them obtain a 'graduate role'. We calculate a mean rating to indicate if this is high, medium or low compared to other universities.
Have a question about this info? Learn more here
Graduate field commentary:
The Higher Education Careers Services Unit have provided some further context for all graduates in this subject area, including details that numbers alone might not show
Have a question about this info? Learn more here
The Longitudinal Educational Outcomes dataset combines HRMC earnings data with student records from the Higher Education Statistics Agency.
While there are lots of factors at play when it comes to your future earnings, use this as a rough timeline of what graduates in this subject area were earning on average one, three and five years later. Can you see a steady increase in salary, or did grads need some experience under their belt before seeing a nice bump up in their pay packet?
Have a question about this info? Learn more here